Win-I2CNTDLL 
                                                                                       Includes I2CPORT v2.0 adapter/programmer  w/EEProm

Win-I2CNTDLL is a complete 32-bit PC-based software/adapter bundle for 100kb/s I²C and includes
the full version of Win-I2CNT for verification of I²C/SMBus hardware.
This kit also includes a DLL for use with other development environments such as Delphi, Visual Basic,
Visual C++, and C++ Builder to create custom I²C applications using CDECL or STDCALL
calling conventions (refer to the User's Manual for details).  Included DLL examples can be downloaded
from our FAQ page . A 3rd party LabView  example is available upon request (no support).

The following lists the basic functionality of the driver:
I2C_Start - generates an Start Condition
I2C_Stop - generates a Stop Condition
I2C_Write - writes a byte to the I²C bus
I2C_Read - reads a byte from the I²C bus.
I2C_WriteArray- writes a specified number of data bytes from an I²C device
I2C_ReadArray - reads a specified number of data bytes from an I²C device
SetI2CFrequency - sets the I²C frequency
GetI2CFrequency - returns the current clock frequency
GetMaxI2CFrequency - returns the maximum possible frequency (user hardware dependent)
SetLPTNumber - allows the user to choose which parallel port to use for I²C bus transmissions
milliseconds - inserts a delay into the I²C message.

A User's Manual and sample applications are included to aid the user to quickly generate their own I²C applications.
The Win-I2CNT hardware documentation is also included  (see FAQ page).
The Win-I2CNTDLL kit includes a single user license for Win-I2CNT and Win-I2CNTDLL. Volume pricing is available upon request.

The LPT port adapter (I2CPORTv2.0) was designed specifically for the software;  includes 3 different I²C header configurations,
on-board socketed 256byte I²C EEprom for easy EE programming;  and includes jumper selectable 5 or 3.3 volt capabilities to
accommodate I²C buses of either supply voltage. The adapter can be self powered from the PC parallel port or from the connected
I²C target system. The I²C connections are standard 4-pin 0.1" stake headers. An LED indicates power and communication activity.

Win-I2CNTDLL Kit Contents:
- Win-I2CNTDLL software/documentation on CD (includes Win-I2CNT software)
- I2CPortv2.0 adapter (shown above)
- QuickStart Guide installation sheet
Note: I2C cable is not included

Please note that Win-I2CNTDLL software / driver is not designed for use with other generic I²C printer port adapters
(such as the legacy/generic "I2CPort" $49 adapter).
Only the I2CPortv2.0 series adapter that is bundled with the software will work properly with Win-I2CNT and Win-I2CNTDLL
software kits.  (However, our I2CPort2.0 will work with other generic I²C parallel port software programs).
Note: I2CPort hardware adapter non-RoHS compliant.
____________________________________________________________________________________
 We are now shipping Win-I2CNTDLL v4.7  (Supports Win-XP)
New: Win-I2CNTDLL v5 update supports Win-XP and Vista 32 and 64 bit operating systems!

Update Information  (Updates are only available for existing licensed Win-I2CNTDLL users)
Software License Agreement

Win-I2CNTDLL   FAQ / Documentation  Page

ORDERING Information Win-I2CNTDLL  $229.00*  USD  (Additional charge for USPS Priority Mail Shipping)
                                                                                                 *Plus California sales tax, if applicable

HOME     BACK to I2C Products

Dec 7, 2008